Configure Polycom IP Phones to work with Midwest SIP account
Last Updated on Wednesday, 07 December 2011 20:48
Polycom IP 450 configuration - (may be the same for most Polycom IP configurations)
First, reset phone defaults.
boot phone, press menu, settings, advanced, type in password (456) then enter, admin settings,
reset to default, reset local, are you sure, yes. phone will then restart.
after reboot, press menu, settings, advanced, type in password (456) then enter, admin settings,
reset to default, reset device settings, are you sure, yes. phone will then restart.
Connect to phone using a web browser: http://_local ip) find in (menu key) (status)
(network) (tcp/ip)
Polycom phone Authentication window: type in Polycom for username and 456 for password.
General
Audio Processing
Codec Preferences
G.711Mu 1
G.711A 2
G.722 not used
G.729AB not used
iLBC 13.33kbps not used
iLBC 15.2kbps not used
SIP
SERVERS
Outbound Proxy
Address sip.midwestsip.com
Port 5060
Transport UDPonly
Server 1
Address sip.midwestsip.com
Port 5060
Transport UDPonly
Expires 3600
Register 1
Retry Time Out 10
Retry Max Count 3
Line Seize Time Out 30
Line 1
Identification
Display Name (Midwest SIP account DID or username)
Address sip:(Midwest SIP account DID or username)@sip.midwestsip.com
Auth User ID (Midwest SIP account DID or username)
Auth Password (Midwest SIP account password)
Label (Midwest SIP account DID or username)
Type Private Shared (click shared)
Third Party Name blank
Num Line Keys 1
Calls Per Line 1
Server 1
Address sip.midwestsip.com
Port 5060
Transport UDPonly
Expires 3600
Register 1
Retry Time Out 10
Retry Max Count 3
Line Seize Time Out 30
Web access...Polycom/456